Samudra’s 4O – Series Submersible motors are 4″ Oil Cooled stainless steel / Cast Iron submersible motors to drive any Borewell / Borehole / Tubewell pumps used for Ground / Underwater pumping. These motors are re-windable, Oil filled, AC, 50 Hz, 2-pole, 2800 rpm, Induction type. These are all high-efficiency motors made up of superior-grade silicon steel laminations for Stator & Rotor and rotor and windings of EC grade pure copper conductors. High-performance, specially designed mechanical seals are provided to prevent the entry of bore water into the motor. High-quality bearings are provided on both sides of the rotor to ensure smooth running. The internal pressure variants are balanced by the in-built rubber diaphragm. The motors have been pre-filled with high-grade, eco-friendly edible oil. The mounting dimensions are as per NEMA standards. These motors are available in CI & SS constructions. This series has a range of power from 0.37 – 7.5 kW [0.5 – 10 HP] and is suitable for borehole sizes of 4″ & above.
Nominal Diameter | 4″ (100 mm) |
Power Range | 1 Ph – 0.37 kW to 2.2 kW 3 Ph – 1.1 kW to 5.5 kW |
Nominal Speed | 2850 rpm |
Voltage range | 1 Phase 230 V, 50 Hz, A.C Supply
3 Phase 380-415 V, 50 Hz, A.C Supply |
Class of Insulation | H |
Degree of protection | IP 68 |
Direction of rotation | Anti-Clock wise |
Type of duty | S1 (Continues) |
Max. Liquid temp. | 33° C |
Starts per hour | 20 Times |
Min. Cooling Flow | 0.15 m/s |
Method of starting | 1 Phase – CSCR / CSR 3 Phase – Direct On Line (DOL) |
Reviews
There are no reviews yet.